Online Store

Heavy-duty acid-replacement cleaner with the performance of hydrofluoric and sulfuric acids but non-corrosive to skin. As an aluminum cleaner and brightener it removes calcium, limescale and silicate deposits, stripping corrosion and oxidation to leave trailer bodies, boats and exterior aluminum bright and clean. As a coil cleaner it clears dust, grime, grease and oxidation from aluminum or copper coils and cooling fins, restoring efficiency and lowering power consumption. Contains no phosphorus. Not for use on anodized aluminum. Corrosive — industrial and commercial use only; review the SDS before handling.

Highly concentrated fleet vehicle wash. Detergents attack dirt and road film and suspend them for fast rinse-off, drying to a spot-free, film-free finish. Formulated for pressure washers and foam brushes: dilute 1:25 for pressure washing, making 26 gallons of wash solution. Dilute 1:100 for hand washing. Corrosive alkaline concentrate (pH 12-13) — industrial and commercial use only; review the SDS before handling.

Heavy-duty truck wash concentrate for high-pressure equipment. Cuts through road tar, salt residue, grease, and exhaust deposits, drying spot-free and film-free. Built for municipal and commercial fleet maintenance. Dilute 1:40 with water for standard pressure-washing use. Corrosive alkaline concentrate (pH 12-14) — industrial and commercial use only; review the SDS before handling.

Water-based cleaner and brightener that lifts brake dust, road grime, oil and scuff marks from wheels and tires without scrubbing or brushing. A low-phosphate alkaline formula that will not deteriorate rubber or harm paint, safe on white walls, chrome, aluminum, magnesium and wire wheels, and on plastic hubcaps. Works in automatic car washes or for manual washing.

Three-in-one automotive cleaner, polish and sealant that restores showroom shine in a single pass. d-Limonene lifts tar, road film and insect remains, while waxes and silicone polymers leave a durable seal protecting the finish from sun, wind and rain. Safe on aluminum, chrome, fiberglass and modern clear-coat finishes. Not for use on flat black or textured black paint.

One-step detergent and wax that cleans away dirt and road grime, then deposits a durable coating that beads water and buffs to a high gloss. Leaves vehicles spotless and film free. Safe on cars, trucks, SUVs, buses, motorcycles, ATVs, boats and golf carts. Dilute 3-6 oz per gallon of water.

Concentrated high-foam detergent formulated for automatic and machine wash systems. Delivers a dense, even foam that rinses clean in hard or soft water without streaking, and lubricates foam brushes to extend equipment life. Dilute 1–6 oz per gallon of water.

Ready-to-use emulsifiable solvent for parts washers in maintenance garages, and for degreasing highway equipment, machinery and truck bodies. A blend of solvents and emulsifiers dissolves heavy grease and oil in minutes, then rinses away with water. Professional equipment use only — review the SDS before handling.

Water-based silicone emulsion that protects rubber tires and whitewalls against cracking, fading, hardening and deterioration. Leaves a long-lasting, deep-black protective coating that resists wash-off, with no smudges or runs. Also shines and renews rubber and plastic bumpers, side moldings, mud flaps and air dams.

Ready-to-use silicone emulsion that conditions and protects vinyl, leather, plastic, rubber, wood and metal against cracking, sun fading, hardening and aging. Anti-soil and anti-static agents repel dust and dirt, restoring a like-new luster to dashes, seats, bumpers and trim. Not for use on steering wheels, pedals or other controls where slipperiness could be a hazard, or on or near clear plastic.

Methanol-based concentrate for windshield washer systems in cars, trucks and buses. Penetrates ice, snow and frost fast for clear visibility in winter, and cuts bugs, road film, salt residue and streaks the rest of the year — one product for all four seasons. Dilution is set by target temperature, from 1:15 at 25 °F down to 1:4 at 10 °F. Highly flammable and toxic — industrial and commercial use only; review the SDS before handling.

Multifunctional gasoline fuel additive that clears deposits and clogs from fuel injectors, carburetors and fuel tanks. Detergents remove gum and varnish while upper-cylinder lubrication reduces wear on cold starts, and it is compatible with catalytic converters and computer-controlled engines. Dose 12 oz per 20 gallons of gasoline.

Concentrated anti-gel additive for diesel fuel and all grades of heating fuel oil. Interferes with wax-crystal formation to keep fuel flowing through lines and filters in cold weather, lowering the fuel’s pour point by approximately 20 °F at the standard dose of 12 oz per 150 gallons, with increased dosing lowering it further. Eliminates the need for tank heaters and prevents cold-weather failures in diesel engines, generators and oil-fired boilers. Complies with federal low-sulfur requirements.

Cetane-improving additive for high- and low-sulfur diesel. Raises the cetane number for easier starts, faster warm-ups and less engine noise, while fuel detergency reduces deposit build-up to restore engine power and extend engine life. Also improves fuel economy and reduces exhaust smoke and emissions. Dose 1 gallon per 200 gallons of fuel, or 1 pint per 25 gallons.

VOC-compliant cold solvent that safely removes grease, oil, tar and asphalt from engine parts, brakes, motors and metal parts. Works quickly without causing corrosion under normal conditions, and parts can be air dried or wiped dry — no rinse step. Built for dip tanks, recirculating parts washers and related equipment, and formulated as an alternative to chlorinated solvents. Highly flammable — industrial and commercial use only.

Concentrated, fully soluble powder built for hot parts-washing in spray cabinets and dip tanks. Works most efficiently at elevated temperatures, stripping oil, grease and baked-on deposits from transmissions, radiators, engines and metal parts without foaming problems. Leaves no film or residue and will not plug spray-cabinet jets or build up inside the cabinet. Contains rust inhibitors that prevent flash rusting on cleaned parts, and generates less waste than solvent cleaning. Spray cabinets: 1-2 oz per gallon of water, held at 190°F for best results. Dip tanks: 1 oz per gallon, soak parts 15-20 minutes, then rinse. Supplied as a white powder, completely soluble in water, VOC under 2.0% by weight. DANGER - may damage fertility or the unborn child, and causes serious eye irritation. For industrial and commercial use only; review the SDS before handling. Not DOT regulated.

High-sudsing concentrated powdered detergent that penetrates and removes road film, tar, insects and general road soils quickly and completely without streaking. Developed for automatic car-washing machines and equally suitable for hand washing, it rinses to a spot-free, film-free finish and will not strip the vehicle's existing wax finish. Contains no petroleum distillates or chlorinated solvents, and is formulated for maximum economy and all-weather versatility across fleet, municipal and commercial wash operations. Hand, mop or spray application: 2-6 oz of powder per gallon of water; mop, sponge or spray onto the vehicle, then rinse thoroughly with clean water. Automatic washers: 1-3 oz per gallon in the wash tank, then follow the machine manufacturer's instructions. Supplied as a blue powder, soluble in water. DANGER - causes serious eye damage and skin irritation. For industrial and commercial use only; review the SDS before handling. Not DOT regulated.

Pre-moistened wipes with a water-based silicone formula that cleans vehicle surfaces and protects them from drying, cracking, fading, dulling and deteriorating. A special anti-static ingredient resists dust and repels it from surfaces, so interiors stay cleaner for longer. Restores original lustre to dashboards, vinyl, leather, wood, metal, rubber, seats, trim, door seals and weather stripping on autos, trucks and boats. Ready to use - pull a towel from the canister, wipe down the surface and allow it to dry to the touch. Each canister holds 40 wipes measuring 10 in. x 12 in.; VOC 0% by weight. Carries no GHS hazard classification, no signal word and no required PPE, which makes it straightforward for schools, municipal fleets and sites with chemical-handling restrictions. Not DOT regulated. Minimum order 50 cases (300 canisters, 12,000 wipes) - this is the smallest quantity that ships under Eco Pro Chem branding.

Non-flammable aerosol solvent and degreaser for electrical equipment, with a dielectric strength of 50,000 volts. Removes dust, dirt, oil and tar from energised and delicate equipment, drying fast without corroding parts or leaving residue behind. Built for electric motors, power tools, generators, refrigeration units, ice machines and vending machines. Ready to use - spray directly onto the surface with a heavy wet spray, use the force of the spray to loosen soil, then wipe clean. Supplied in 20 oz cans with 18 oz net contents, twelve cans per case. Sold in case lots of six dozen (72 cans), which is the supplier's minimum order for this aerosol. DANGER - suspected of causing cancer, harmful if inhaled, may cause an allergic skin reaction, and may cause drowsiness or dizziness. Pressurised container. DOT regulated: UN1950, Aerosols, Class 2.2, limited quantity. For industrial and commercial use only; review the SDS before handling.

Aerosol de-icer that instantly lowers the freezing point of water to melt snow, ice and frost from windshields, wiper blades, mirrors, headlights, trunk and door locks, door handles and door creases. Also works as a defogger on the inside of car windows, and helps prevent ice and frost from reforming - giving drivers better visibility for safer winter operation. Ready to use: spray directly onto snow, frost or ice. This is the point-of-use companion to WinterShield™ Windshield Deicer Concentrate, which serves the same fleet from the washer tank. Supplied in 16 oz cans, twelve per case, sold in case lots of six dozen (72 cans), the supplier's minimum order for this aerosol. DANGER - methanol-based. Extremely flammable aerosol; toxic if swallowed, in contact with skin, or inhaled; causes damage to organs. Contains gas under pressure. DOT regulated: UN1950, Aerosols, Class 2.1. Industrial and commercial use only; review the SDS before handling.

VOC-compliant aerosol cold solvent that removes grease, oil, dirt and grime from engine parts, brakes, motors and metal parts. Works quickly on metal without causing corrosion under normal conditions, dries with no residue and needs no rinse step. Also suitable for mechanical parts, ceramics, porcelain and appliances, and is formulated as an alternative to chlorinated solvents. This is the point-of-use companion to AutoForce™ Quick-Dry Solvent Cleaner: a shop with a dip tank wants the bulk liquid, a mobile technician wants the aerosol. Ready to use - spray the surface to remove grime, then wipe dry. Supplied in 20 oz cans with 14 oz net contents, twelve per case, sold in case lots of six dozen (72 cans), the supplier's minimum order for this aerosol. DANGER - extremely flammable aerosol, contains gas under pressure, causes serious eye irritation and may cause drowsiness or dizziness. DOT regulated: UN1950, Aerosols, Class 2.1. Industrial and commercial use only.

Aerosol starting fluid that gets engines turning over in extreme cold and damp weather, effective to -65°F. Works on two-cycle and four-cycle engines and on both gasoline and diesel - the one product in the AutoForce™ line that covers both fuels. High-endurance lubricants protect against corrosion while preserving the battery and ignition system by minimising crank time during start-up. Ready to use: spray into the air cleaner or carburetor for two to three seconds, then repeat up to three more times if the engine still fails to start. Do not exceed that - overuse of starting fluid is a common cause of engine damage. Supplied in 16 oz cans, sold in case lots of six dozen (72 cans), the supplier's minimum order for this aerosol. DANGER - may cause cancer. Extremely flammable liquid, vapour and aerosol; harmful if swallowed; may be fatal if swallowed and enters airways. Industrial and commercial use only; review the SDS before handling.